Widget HTML Atas

Ndot Standard Specifications For Highway Construction


Supplemental & Standard
Specs Book

File Download Disclaimer

The Nebraska Department of Roads (NDOR) allows the use of the information, including but not limited to data/design files, from its website on the express condition that such information is to be used at the user's risk.

NDOR expressly disclaims warranty of any type for such information, and makes no representation whatsoever regarding the correctness, the completeness, the merchantability or fitness for a particular use of such information. NDOR does not warrant such information against deficiencies of any type or nature. The use of such information for work which is under contract with NDOR does not relieve the contractor of any obligation assumed by the contractor for the complete and proper fulfillment of the terms of the contract. NDOR shall not be responsible for loss or damage to the contractor attributed to or resulting from the contractor's use of such information.

WARNING: Website information is subject to periodic change and/or updating without notice. Anyone relying on such information must bear the risk that the information downloaded previously may not be the most current version available. The user should check often for updates.

Please read and understand the above Disclaimer before proceeding.

NDOR Supplemental and Standard Specifications for Highway Construction

ENGLISH UNITS EDITION
Table of Contents
Division 100 Division 200 Division 300 Division 400 Division 500
Division 600 Division 700 Division 800 Division 900 Division 1000

Division 100 - General Requirements and Covenants

  • 101 - General Information, Definitions and Terms
  • 102 - Proposal Requirements and Conditions and Awarding of Contracts of Contracts on State Highway Work
  • 103 - Award and Execution of the Contract
  • 104 - Scope of Work
  • 105 - Control of Work
  • 106 - Control of Material
  • 107 - Legal Relations and Responsibility to the Public
  • 108 - Prosecution and Progress
  • 109 - Measurement and Payment
  • 110 - Wages and Conditions of Employment
  • 111 - Plans and Specifications
  • 112 - Mobilization
  • 113 - Partnering
  • 114 - Construction Surveying

Return to the top

Division 200 - Earthwork
  • 201 - General Requirements
  • 202 - Clearing and Grubbing
  • 203 - Removal of Structures and Obstructions
  • 204 - Temporary Water Pollution Control
  • 205 - Excavation and Embankment
  • 206 - Roadway Grading
  • 207 - Salvaging and Placing Topsoil
  • 208 - Borrow and Waste Site Restoration
  • 209 - Overhaul

Return to the top

Division 300 - Subgrade Preparation, Foundation Courses, Base Courses, Shoulder Construction and Gravel Resurfacing
  • 301 - General Requirements
  • 302 - Subgrade Preparation and Shoulder Subgrade Preparation
  • 303 - Subgrade Stabilization
  • 304 - Earth Shoulder Construction
  • 305 - Crushed Rock Base Course
  • 306 - Granular Fill
  • 307 - Foundation Course
  • 308 - Median Construction
  • 309 - Calcium Chloride Treatment
  • 310 - Rock or Gravel Surfacing
  • 311 - Furnish Rock or Gravel
  • 312 - Removal and Processing of Concrete Pavement

Return to the top

Division 400 - Lighting, Signs and Traffic Control

  • 401 - Lighting and Traffic Signal General Requirements
  • 402 - Electrical Wire and Cable Conduit
  • 403 - Direct Buried Wire and Cable
  • 404 - Aerial Cable
  • 405 - Conduit
  • 406 - Pull Boxes
  • 407 - Pole and Tower Foundations
  • 408 - Poles and Towers
  • 409 - Signal Heads
  • 410 - Detector
  • 411 - Traffic Signal Controllers
  • 412 - Luminaries
  • 413 - Lighting Control Centers
  • 414 - High Mast Lowering Systems
  • 415 - Project Lighting System Maintenance
  • 416 - Temporary Lighting Systems
  • 417 - Highway Signs
  • 418 - Overhead Sign Supports
  • 419 - Plowable Pavement Markers
  • 420 - Delineators
  • 421 - Removing and Resetting Delineators
  • 422 - Temporary Traffic Control Devices
  • 423 - Traffic Provisions
  • 424 - Permanent Pavement Marking
  • 425 - Video cameras

Return to the top

Division 500 - Bituminous Pavement
  • 501 - General Requirements
  • 502 - Asphaltic Concrete Pavement Smoothness
  • 503 - Asphaltic Concrete
  • 504 - Tack Coat
  • 505 - Asphaltic Concrete Curb
  • 506 - Asphaltic Concrete Island Noses and Medians
  • 507 - Asphaltic Concrete for State Maintenance Patching
  • 508 - Joint Sealing - Asphalt to Concrete
  • 509 - Bituminous Sand Base Course
  • 510 - Cold Milling
  • 511 - Salvaging and Stockpiling Bituminous Material
  • 512 - Bituminous Surface Course
  • 513 - Fog Seal
  • 514 - Microsurfacing
  • 515 - Armor Coat
  • 516 - Bituminous Pavement Patching
  • 517 - Prime Coat
  • 518 - Fabric Reinforcement
  • 519 - Crack Sealing Bituminous Surfacing
  • 520 - Bituminous Patching of Concrete Pavement

Return to the top

Division 600 - Portland Cement Concrete Pavements

  • 601 - General Requirements
  • 602 - Portland Cement Concrete Pavement Smoothness
  • 603 - Concrete Pavement
  • 604 - Concrete Base Course
  • 605 - Concrete Pavement Repair
  • 606 - Concrete Curb and Concrete Cutter
  • 607 - Concrete Sidewalks, Bikeways and Median Surfacing
  • 608 - Concrete Island Nose
  • 609 - Concrete Driveways
  • 610 - Concrete Median Barriers
  • 611 - Sealing Transverse and Longitudinal Cracks
  • 612 - Sealing Transverse and Longitudinal Joints

Return to the top

Division 700 - Bridges, Culverts and Related Construction

  • 701 - General Requirements
  • 702 - Excavation for Structures
  • 703 - Piles and Pile Driving
  • 704 - Concrete Construction
  • 705 - Precast/Prestressed Concrete Structural Units
  • 706 - Concrete Bridge Floors
  • 707 - Reinforcement
  • 708 - Steel Structures
  • 709 - Painting
  • 710 - Concrete Bridge Deck Repair With Silica Fume Concrete
  • 711 - Concrete Bridge Deck Repair With High Density/Low Slump Concrete
  • 712 - Fixed Bearings and Expansion Bearings, TFE Type
  • 713 - Confined Elastomeric Bearing Devices (Pot Bearings)
  • 714 - MSE Walls With Concrete Facing Panels
  • 715 - MSE Walls With Modular Block Facing Units
  • 716 - Steel Railings
  • 717 - Concrete Box Culverts
  • 718 - Culvert Pipe
  • 719 - Corrugated Metal Pipe Culverts
  • 720 - Concrete Pipe Culverts
  • 721 - Driveway Culvert Pipe
  • 722 - Sewers
  • 723 - Tapping Existing Drainage and Sewer Facilities
  • 724 - Installation and Removal of Flared-End Sections
  • 725 - Bar Grates for Flared-End Sections
  • 726 - Culvert Sand fill
  • 727 - Subsurface Drainage Matting
  • 728 - Riprap Filter Fabric
  • 729 - Deck Joint Seals
  • 730 - Strip Seals
  • 731 - Jacking Culvert Pip, Sewer Pipe, and Casing
  • 732 - Lead Base Paint Removal
  • 733 - Bridge Deck and Approach Slab Smoothness
  • 734 - Precompressed Polyurethane Foam (PPP) Joint

Return to the top

Division 800 - Roadside Development and Erosion Control

  • 801 - Removing and Resetting Trees
  • 802 - Furnishing and Planting of Plant Materials
  • 803 - Seeding
  • 804 - Fertilizing
  • 805 - Mulching
  • 806 - Sodding
  • 807 - Erosion Control
  • 808 - Erosion Checks
  • 809 - Silt Fence
  • 810 - Slope Protection
  • 811 - Slope Protection Netting
  • 812 - Cover Crop Seeding
  • 813 - Peat Moss

Return to the top

Division 900 - Incidental Construction

  • 901 - Field Laboratories, Field Offices, and Scale Houses
  • 902 - Guardrail and Guard Posts
  • 903 - Remove and Reset Guardrail
  • 904 - Inertial Barrier Modules
  • 905 - Rock Riprap
  • 906 - Broken Concrete Riprap
  • 907 - Gabions and Revet Mattresses
  • 908 - Concrete Slope Protection, Ditch Lining, Flumes, and Discharge Structures
  • 909 - Installing Tie Bars
  • 910 - Right-of-Way and Barbed Wire Fence
  • 911 - Chain-Link Fence
  • 912 - Special surface Course for Mailbox Turnouts
  • 913 - Right-of-Way Markers
  • 914 - Pipe Underdrains
  • 915 - Granular Subdrains
  • 916 - Catch Basins, Manholes, Inlets, and Junction Boxes
  • 917 - Reconstruction of Manholes and Adjusting Manholes to Grade
  • 918 - Abandoning Manholes, Inlets, and Junction Boxes
  • 919 - Equipment Rental
  • 920 - Dampproofing
  • 921 - Mailbox Posts

Return to the top

Division 1000 - Material Details

  • 1001 - General Instructions and Requirements
  • 1002 - Portland Cement Concrete
  • 1003 - Flowable Fill
  • 1004 - Portland Cement
  • 1005 - Water for Concrete
  • 1006 - Calcium Chloride
  • 1007 - Chemical Admixtures
  • 1008 - Fly Ash
  • 1009 - Silica Fume
  • 1010 - White Opaque Polyethylene Film and White Burlap-Polyethylene Sheet For Curing Concrete
  • 1011 - Burlap for Curing Concrete
  • 1012 - Liquid Membrane-Forming Compounds for Curing Concrete
  • 1013 - Bituminous Liquid Compounds for Curing Concrete
  • 1014 - Joint Sealing Filler
  • 1015 - Preformed joint Filler
  • 1016 - Preformed Polychloroprene Elastomeric Joint Seals
  • 1017 - Caulking Compound
  • 1018 - Epoxy Compounds and Adhesives
  • 1019 - Sealing Compounds
  • 1020 - Steel Bars for Concrete Reinforcement
  • 1021 - Epoxy Coated Reinforcing Steel
  • 1022 - Dowel Bars
  • 1023 - Cold-Drawn Steel Wire for Concrete Reinforcement
  • 1024 - Welded Steel Wire Fabric for Concrete Reinforcement
  • 1025 - Steel Wire for Prestressed Concrete Units
  • 1026 - Steel Strand for Prestressed Concrete Units
  • 1027 - Deformed Metal Center Joint and Metal Keyway
  • 1028 - Asphaltic Concrete
  • 1029 - Asphalt Cement
  • 1030 - Liquid Asphalts
  • 1031 - Emulsified Asphalt (Anionic)
  • 1032 - Emulsified Asphalt (Cationic)
  • 1033 - Aggregates
  • 1034 - Soil Binder
  • 1035 - Corrugated Metal Pipe
  • 1036 - Metal Flared End Sections
  • 1037 - Reinforced Concrete Pipe, Manhole Risers, and Flared-End Sections
  • 1038 - Plastic Pipe
  • 1039 - Ductile Iron Pipe
  • 1040 - Steel Pipe and Structural Tubing
  • 1041 - Drain Tile
  • 1042 - Structural Plate Pipe
  • 1043 - Flap Gates
  • 1044 - Bar Grates for Flared-End Sections
  • 1045 - Structural Steel
  • 1046 - End Welded Studs
  • 1047 - Welding Electrodes and fluxes
  • 1048 - Steel Forgings
  • 1049 - Cold-Finished Bars and Shafting
  • 1050 - Steel Castings
  • 1051 - Iron Castings
  • 1052 - Galvanized Sheet Metal
  • 1053 - Sheet Zinc
  • 1054 - Sheet Aluminum
  • 1055 - Sheet Lead
  • 1056 - Steel Sheet Piles and Sheet Pile Corners
  • 1057 - Low Carbon Steel Fasteners
  • 1058 - High Tensile Bolts, Nuts, and Washers
  • 1059 - Zinc Coating on Hardware
  • 1060 - Galvanized Cable Clamps
  • 1061 - Repair of Damaged Metallic Coatings
  • 1062 - Zinc-Coated and Aluminum-Coated Steel Wire Strand
  • 1063 - Zinc-Coated and Aluminum-Coated Carbon Steel Wire
  • 1064 - Fences
  • 1065 - Polystyrene Board Fillers
  • 1066 - W-Beam and Thrie-Beam Guardrail
  • 1067 - Steel Guardrail Posts and Special Posts
  • 1068 - Elastomeric Bearings and Laminated Bearing Pads
  • 1069 - Temporary Pavement Marking
  • 1070 - Highway Signs
  • 1071 - Posts and Fasteners for Highway Signing
  • 1072 - Reflectors
  • 1073 - Roadway Lighting, Sign Lighting, and Traffic Signals
  • 1074 - Gabions and Revet Mettresses
  • 1075 - Timber and Lumber
  • 1076 - Wood Preservatives
  • 1077 - Paints and Protective Coatings

Download Entire English Specifications Book Here. (2.4Mb)

Return to the top

Source: http://www.nebraskatransportation.org/ref-man/supspece.htm

Posted by: malikmalikyezeke0264329.blogspot.com